Qualifications

@

Quality Policy

UL

ISO-9002


   Quality Policy  

@

1.

Provide products & services to meet the quality expectations of our customer.

2.

Enable all employees to do their job right at the first time.

@

   UL  

1. File No. G E55879
2. Type No. G Add "TJE" on all TAI JING'S products
3. Material G SS: Single sided
DS: Double sided
4. Company Name G REF. Appendix company name list.
5. ANSI Grade G Grades determined by
American National Standards Institute.
6. Flammability G Flammability determined by UL 94.
7. Minimum Thickness G Minimum thickness of usable material copper
thickness is excluded.
8. Pattern Limit G A: Minimum width of copper trace that locates at
     least 0.5mm away from PWB edge.
B: Maximum width of copper trace.
C: Minimum width of copper trace that palallel with
     PWB edge and locates within 0.5mm to the edge.
9. Temperature Rating G Maximum operation temperature.
10. Solder Limit G Maximum soldering temperature and soldering time.
11. D.S.R. G Direct support requirements(UL 796)
YES: meets D.S.R.(also can be marked"").
   No: does not meet.
12. Process G A: Normal printing process.
B: May nickelBgoldBsolder plate contact finger or
    print pattern.
C: May print carbon paste or silver paste.
13. Solder Resist Ink G May use TAMURA SR-31G-30
               Aryib 31-511
               ASAHI PR-120G-30
               TAMURA USR-2G
14. Yellow Card G Copy available.
15. UL Recognition G Any modificaion/addition of specification,need
at least six months for application.

@

   ISO-9002